USE INSTRUCTIONS
InSpec™ QT is designed for spraying, wiping and mopping applications. Hold spray approximately 15cm to 20cm from area to be treated. 5L versions, pour into an appropriate container for mopping. 100ml concentrate added to 2.5L of water is required for mopping. Apply to surface to ensure complete coverage.
TECHNICAL DATA
Aldehyde-free disinfectant cleaner. 4% RTU Solution pH 11.8-12.2 Concentrate pH 12.9.
STORAGE & SAFE HANDLING
Store upright in original closed containers, away from sunlight and extremes of temperature. Full guidance on the handling and disposal of this product is available in the Safety Data Sheet (SDS).
EFFICACY
See summary table in Section 1 of this brochure.
MATERIAL COMPATIBILITY
Application of solutions, when used as directed, will not affect materials normally encountered in the cleanroom. See compatibility information in the Technical Dossier.
BENEFITS
ECHNICAL USER INFORMATION
InSpec™ QT is a sterile disinfectant in pre-diluted and concentrated formats. InSpec™ QT is manufactured to GMP in an ISO 6 cleanroom. The product is filled and capped in an ISO class 5 environment.
The solution is filtered through a 0.2 micron filter and gamma irradiated to a validated process (at 25-45kGy) to give a sterility assurance level SAL of 10-6.
Trigger sprays supplied with 900ml solution in a 1L container.
InSpec™ QT is supplied with Certificates of Conformity, Analysis, Irradiation Sterility and Endotoxin.
All formats of QT have a stabilised 24 month shelf life.
For screw cap bottles use the entire contents after opening.
Summary of InSpec Biocide Qualification
United States Pharmacopoeia (USP) General Chapter 1072 “Disinfectants and Antiseptics”13.
This chapter stipulates that a 3 log reduction in the viable microbial count should be demonstrated for bacteria.
Our Safety Data Sheets are currently being updated.If you would like to request current Safety Data Sheets, please Contact us
Product Enquiry, Quotes & Samples